TYRE CHANGER - TCL24123RG

TCL2413RG – TIRE CHANGER 24

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DaTo Tyre changer are specially designed to demount and mount low profile tires and also to handle rum flat tires with strong side walls. The side Assist arms could be ordered to be supplied with Left Hand Side Assembly as well. The quick inflation pedal provided supports jet blast inflation for tubeless tires.

Main Features:

1.      Tilt back tire changer.

2.      Aluminium bracket pedal assembly, exquisite and durable, convenient repair.

3.      Enhanced inner box structure provide long time and high strength service

4.      Enhanced mounting bar

5.      Clamping cylinder

6.      fiber Caps provided in the clamping Jaws to prevent Scratch on the wheels

7.      Quick inflation for tubeless tires with jet blast inflation technology.

PARAMETERS	TCL2413RG
Working Pressure	8-10 bar
Power Supply	220V/380V
Motor Power	1.1KW
Inner Clamping dia.	12~24"
Outside Clamping dia.	10~21"
Aux. Arm Dimension	1.23X.45x.35

Packing Dimensions	1050x1060x950mm
	1220x900x400mm
NW.KG	292
GW.KG	367

HEAVYDUTY WHEEL ALIGNMENT - DHW 8002

HEAVYDUTY WHEEL ALIGNMENT - DHW 8002

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DHW8002 is the Wheel Aligner for all the Truck models (Trucks, Van, Large Agricultural vehicle, buses, Semi-trailer and full trailer using 6 Sensors. It has the Sensor unlimited Extensions for the multi valve vehicle. It has the advance stable ZigBee communication.

DaTo wheel Alignment Provide solution for Double Steering axle Synchronous Display with Dynamic measurement in one time alignment. It is also suitable for cars and in case of aligning the Trailer no need to detach for trailer alignment. In order to avoid the interference of light DaTo developed the Super strong anti-light interference infra-red CCD Measurement Technology.

Brake Disc &Drum Lathe – METSE 101

Brake Disc &Drum Lathe – METSE 101

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DaTo Brake Lathe uses precision electric DC servo motors designed to meet the demands requirement on industrial motion control. The “change adapter system eliminates the need for the conventional hell clamps and cones and features built-in springs ensure you don’t lose them. The precision twin cutter tools and quick drum to rotor change over to help increase your service capability. Infinitely variable spindle and cross feed settings allow for quick rough and precision finish cuts. 

A convenient top storage tray means you can easy to take your favorite adapters and tools. Separate motors on the drum and Rotor feed help maximize the main motor’s efficiency. The variety of adapters lets your machine all standard and composite rotors for foreign and domestic cars and Light trucks. Positively rake cutter angle provides for one pass finish virtually every time, allowing you to complete your work fast

Min – Max Drum capacity	150 – 170 mm
Max Drum depth	210 mm
Max Disc Diameter	860 mm
Max Disc depth	150 mm
Max Disc Thickness	60 mm
Spindle rotation speed	70 - 100 - 145 g/ min
Variable table feed Speed	0 – 27 mm / min
Spindle Motor	0.75 Kw
Dimensions (L,W,H)	840 X 505 X 510 mm
Weight	205 Kg

Specification

                                                                                         

OIL DRAINER ITALY

OIL DRAINER ITALY

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

The recovery of the exhausted oil happen for fall, through the lateral basin adjustable for height, and also for aspiration through the probes. After depressurization have a self-regulating working without the necessity of continue connection of compressed air, for an independent and quick aspiration, using the suitable probe between the included kits of 10 probes. The units can suck till 2/3 of their capacity.

The pre-chamber permit the immediately control of quantity and quality of the aspirated oil, is equipped with a device for the internal cleaning.

Change the oil at a temperature of 60° - 80°C (when the engine is just switched off).

Features

• For the recovery for fall of exhausted oil in the engine, the transmission and the differential of motor-vehicles on the lift bridge.
• The basin is equipped with a grate to support for drip the substituted ilters, and it can be regulated according to the height.
• Exhausted oil drain unit 90 l
• Recovery basin capacity 15 l without ergonomic abs funnel

Automechanika Dubai 2018 Exhibition

DaTo is proud to announce its participation to the Automechanika Dubai 2018 Exhibition commencing on 1st of May 2018;

AUTOMECHANIKA DUBAI 2018 Exhibition

DaTo is proud to announce its participation to the Automechanika Dubai 2018 Exhibition commencing on 1st of May 2018;

WELCOMING ALL WELL WISHERS and GUESTS to:

SHEIKH SAEED HALL 1

STAND No: S1- J 12 & S1-L 36

The Automechnika Dubai Exhibition was an another glorious exhibition and pride for DaTo, where in it show cased the cutting edge technological advancements of the machines and its features and had welcomed guests from all continents. The appreciation goes to the entire DaTo team members who has joined hands in presenting the products and its technological advancements to the guests.

Looking forward to greeting you all in the Exhibition,

GENERAL INFORMATION:

Show dates    : 1 – 3 May, 2018 (Tuesday - Thursday)

Show timings : 10 am – 7 pm on all 3 days
Venue             :  Dubai World Trade Center, UAE

Support & Queries:  Mr. Arun Sivanand, Mob: 00971-557163030

                                Mr. Mohammed Burhan, Mob : 00971-557163017

SMOKE ANALYSER / OPACITIMETER DSA 300

Split structure, separated measuring unit and control unit for easy operation. Large LCD screen, Chinese or English iteractive menu, with opacity reading and light absorption coefficient reading, simple, direct and convenient operation.

With functions of free acceleration test and measurement of transients, automatic process of test data and display of measuring results. With functions of License Plate Number entry, save, data view.

15 minutes warm-up time, automatic zero reset. With adoption of advanced partial flow technology, measuring unit tests smoke emissions of diesel powered vehicles directly. "Scavenge air curtain" technology prevents the optical system from being polluted. With constant temperature control in the sample cell, it can avoid condensation and influence of accuracy due to change of temperature. With functions of data printing and communication with host computer. Serial RS-232C interface or RS-485C interface can be selected.

The performance meets the requirements of ISO11614 and GB3847-1999.