MECBS211 - CNC - CYLINDER VERTICAL BORING & SURFACING MACHINE

MECBS211 - CNC - CYLINDER VERTICAL BORING & SURFACING MACHINE

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DaTo Machine tools and equipment for reconditioning of Engine parts like cylinder heads, blocks, valves of motorcycles, cars, commercial vehicles, trucks and marine engines.

The MECBS211.CNC boring machine combines the two main operations of reconditioning the Monobloc’s of cars and trucks, such as boring and smoothing, in a single machine and now completely automatically thanks to CNC control.
The finest finishing and precision qualities that characterize it are the result of a combination of a proven mechanical design and the introduction of highly innovative technology solutions that make it smart even faster and more practical to use.

Standard equipment

• Computer Numerical Control using LINUX Operating System and ARMv8 CPU Processor
• Precision Ball screw drives on 3 Axis
• Movements by linear railways on 3 Axis
• Brushless motors on 3 axis controlled by CNC
• Swing arm control panel with double touch screens
• Electronic Hand wheel for manual displacement on 3 Axis (Fast-Medium-Fine speeds)
• Full automatic and programmable working modes for boring and milling operations
• WI-FI and LAN connections for support and service
• PV0160 pair of parallel supports
• PV0021 large clamps (2 pcs.)
• PV0022 small clamps (4 pcs.)
• Wrench set
• Instruction manual

MECBS101 - CYLINDER VERTICAL BORING MACHINE

MECBS101 - CYLINDER VERTICAL BORING MACHINE

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DaTo Machine tools and equipment for reconditioning of Engine parts like cylinder heads, blocks, valves of motorcycles, cars, commercial vehicles, trucks and marine engines

 The MECBS101 boring machine has been manufactured to recondition cylinder blocks of motor cars and trucks with a diameter of 30÷170 mm. The excellent qualities of finishing and precision are ensured by the combination of a tested mechanic structure with new innovative technical solutions, which enhance the performance and versatility of the machine.
All machine parts supplied with the standard equipment, such as the fast cylinder centering device with scanning level on the boring bar and the centesimal dial indicator, the clear and straightforward control panel, as well as the depth of boring control dial gauge, can ease and speed up the work. Moreover, the adjustable boring bar's rotation speed provide for the best finishing.

Standard equipment

• Adjustable spindle speed with digital indicator
• Adjustable boring bar feed
• Adjustable table feed (only model MECBS)
• Tool setting dial indicator with magnetic base
• Depth of boring device with dial indicator
• Precision centering device with dial gauge
• Adjustable control stop
• PV0160 Pair of parallel supports
• Wrench set
• Instruction manual

MECBS201 - CYLINDER VERTICAL BORING & SURFACING MACHINE

MECBS201 - CYLINDER VERTICAL BORING & SURFACING MACHINE

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

DaTo Machine tools and equipment for reconditioning of Engine parts like cylinder heads, blocks, valves of motorcycles, cars, commercial vehicles, trucks and marine engines

The cylinder boring/resurfacing machine MECBS201 includes both main reconditioning operations of automotive and truck cylinder blocks - boring and resurfacing - in one single machine, with performances that are usually available only on higher level models. Despite its compact dimensions, the technical features of this machine ensure considerable work capacities, thanks to the wide longitudinal and transverse table feed and to the vertical feed of the head.
The excellent qualities of finishing and precision are obtained by combining a tested mechanical structure with innovative technical solutions, which improve the performance and versatility of the machine

Standard Features

• Adjustable spindle speed with digital indicator
• Adjustable boring bar feed
• Adjustable table feed (only model MECBS201)
• 1/2” CBN or PCD milling plate dia. 320 mm
• Tool setting dial indicator with magnetic base
• Depth of boring device with dial indicator
• Precision centering device with dial gauge
• Adjustable control stop
• PV0160 Pair of parallel supports
• Wrench set
• Instruction manual

LJP104 Post Lift

LJP4104 - 4.0Tons FOUR POST LIFT - WHEEL ALIGNMENT

Dear all,
Due to the current situation with Coronavirus (COVID-19,)
For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

The Four Post lifts are most suited for Quick Oil Change as well as the most economic and professional lifting facility available for the Alignment. Equipped with a Center Rolling Jack, the DaTo 4 post lift seems to be the wise choice for any class of Service Center.

Features:

1. Fully Powder Coated lift
2. Durable Teflon Balls for Side Slip
3. Additional Safety locking Mechanism
4. Pretected to complete operational stability
5. Quick installation possible
6. Low noise operation
7. Center Rolling Jack of 2 Tons

LJP4104

Capacity	4.0T
Lifting Height mm	1896mm
Lifting Time	<60Sec
Lowering Time	<40Sec
Power Supply	220/380V
Motor Power	2.2KW
Drivable Width mm	2742
Overall Width mm	3342
Overall Height mm	2230
Overall Length mm	5747

PBBSF122 - PAINT BOOTH - STANDARD

PBBSF101 - PAINT BOOTH - ECONOMIC

Dear all,
Due to the current situation with Coronavirus (COVID-19,)
For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

The PBBSF122 Paint booth is the standard design of a Professional Paint Booth delivered by DaTo.

Installed with two blowers (one turbo speed blower motor and one 5.5KW blower on the exhaust), it delivers 22,000 m³/h of Air flow volume. The possibility of the Exhaust Blower enables the painter to have more wide angle spray over the vehicle without over spray due to high suctional force. Also enables healthy and good breathing habits for the Painter.

Installed with Italian Burner (diesel) for baking function, the quick baking function eliminates dust free paint finish. 

In most cases you can deliver the car without a polish. Optimized for high speed Glossy Painting. 

Specification

PARAMETER	PBBSF122
Overall Dimension (m)	7.0*5.3*3.5
Inner Dimension (m)	6.9*3.9*2.7
Drive Through Door Width (m)	3
Drive Through Door Height (m)	2.7
Steel Plate Thickness (mm)	0.326
Filtrated Area (m²)	20
Air Flow Volume (m³/h)	22000
Air Velocity within booth (m/s)	0.25~0.35
Ventilation Times (times/hr)	265
Working Temperature ( °C)	60~80
Oil Consumption (kg/set)	6~8
Insulation material of Wall Panel	PE
Power (KW)	13.5
Main Blower	Inlet 7.5 KW Professional Blowers & Exhaust 5.5 KW Standard Blower

DaTo Sicssor Lift

LJS 8240 / 8255 - Scissor Lift

Dear all,Due to the current situation with Coronavirus (COVID-19,)For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

The Large platform scissor lifts are the wise choice for the alignment works in the service center, being possible to cater to the requirements of the side slip plates, turn tables for the front wheels . The sturdy scissor lift provides ample free mobility area between the twin platforms for ease movement and adjustments. The lift totally sink underground provides facility of clear floor and total space utility when not in use.

Features

1.      InGround installation , total space utility when not in use.

2.      Low Voltage control of 24V.

3.      With anti-Knock Valve and safety valve to ensure additional safety.

4.      Stable and reliable Operation.

5.      Perfect synchronising and precise leveling for alignment.

6.      Adjustable Turntable Position to suit various types of vehicle.

7.      Drive on ramp optional for on ground installation.

WESCA160- Digital Spot Pulling Machine

WESCA160- Digital Spot Pulling Machine

Dear all,
Due to the current situation with Coronavirus (COVID-19,)
For Sales & Technical Support Contact:- +97165303915, +971557163016 #WhatsApp available #Email info@datotech.de

WESCA160 machine is equipped with innovative and advanced technology that allows the operating voltage to be compensated automatically. When the welder is connected to an AC380V power supply, the system compensates for variations of the main supply voltage and ensures a constant level current to achieve a high quality performance. The uniquely designed gun cable support arm allows flexible movement with a 360^o rotation.    

                                               

Features

1)       Microprocessor control system optimizes the welding parameters. Due to the adoption of advanced digital control technology and user friendly design, all you have to do is select the welding current corresponding to the work piece thickness to achieve the best weld quality

2)      Automatic mains voltage monitoring

3)      Digital control system offers greater stability of the output power

4)      The welding gun testing function to evaluate the usage status of the welder more comprehensively

5)      Overheating protection

6)      High precision time and power adjustment system

7)      Designed to repair different kinds of car steels such as conventional steel, stainless steel, etc

8)      Complete with triangle washers for dent pulling

9)      Variety welding procedures are available such as shrinking, washer welding, dent pulling, spot welding, flattening, wavy wire welding, stud welding, OT washer welding, triangle washer welding etc.

10)   Digital display

11)   Large pulling hammer and waveform wire welding

12)   Step less current regulation